Track cleaning machine POM-1 is intended for mechanized cleaning and removal of snow and spills on industrial tracks with the gauge of 1520 mm. 
  Its main difference from railway cranes is the absence of cargo winches and outriggers and is fitted instead with a rotary broom installed in place of a boom. The rotary broom is assembled with lengths of wire rope ends 19 mm in diameter and 1050 mm in length.
  The machine is equipped with a unified multi-motor diesel-electric drive operating from three-phase alternating current 380V, 50Hz.
  The machine is equipped with direct-action air-brake system for braking in travel at operational and transportation speeds and besides it has an automatic braking mechanism that operates when the machine is towed in a consist. The rotary unit (broom) is capable of semi-circular turns through 180° around its vertical axis. It allows to use the machine not only for cleaning of the track it stands on but also for cleaning of parallel tracks.
  The railway cleaning machine is powered by a diesel engine YaMZ-238D,and a generator 150kW.
  The machine is equipped with a special rope handling unit that allows to replace the brooms worn-out when cleaning the ropes in any conditions, including «field conditions».
  Operating temperature range is from -40°C to +40°С.

Technical specification

Parameter name
Parameter value

Traveling speed, when self-propelled, km/h:

  • operational speed
  • transportation speed

Thickness of snow, mm
ut to 300
Cleaning width, mm
Diameter of broom (at rope ends), mm
Diameter of broom ropes, mm
Broom rotation speed, rpm
Rotation frequency of the machine’s turning platform, rpm
Permissible route gradient (grade limit), ‰:
  • at operational speed
  • at transportation speed

25 (1,43)
10 (0,57)
Overall dimensions, mm:
  • length
  • width
  • height
  • tail radius

11 500
3 400
4 455
3 300
Minimum curving radius, m
Maximum towing speed in a train, km/h
Weight, t

The company reserves the right to change or modify technical specifications of products. Specifications and the list of equipment should be specifed during the process of request planning.